Surgical Gowns Manufacturer & Exporter India
Reusable cotton and disposable SMS/SMMS surgical gowns, isolation gowns, and visitor gowns. AAMI Level 1-4 barrier protection with sterile and non-sterile options. CE marked for EU export. Bulk manufacturing and worldwide shipping.
Certified Surgical Gowns for Global Hospital Supply Chains
TMR Uniforms manufactures a comprehensive range of surgical gowns for hospitals, surgical centers, and healthcare distributors worldwide. Our product line spans reusable autoclavable cotton gowns rated for 50-75 sterilization cycles through to disposable SMS and SMMS nonwoven gowns meeting AAMI PB70 barrier standards up to Level 4. Every surgical gown is manufactured with attention to critical construction details -- knitted cuffs, thumb loops, wraparound closures, and reinforced critical zones -- because we understand that surgical gowns are not just garments but essential barrier protection devices for the operating theatre.
- AAMI Level 1 through Level 4 barrier classifications available
- SMS and SMMS nonwoven for disposable gowns at 35-60 GSM
- Autoclavable cotton gowns rated for 50-75 sterilization cycles
- Sterile ETO packaging with sterilization indicators
- EN 13795 compliant and CE marked for EU export
Surgical Gowns — Complete Product Range
From routine isolation procedures to high-risk surgical interventions, we manufacture gowns for every clinical scenario
Reusable Cotton Surgical Gowns
Made from 100% cotton or poly-cotton at 140-180 GSM. Autoclavable at 121-134 degrees Celsius, rated for 50-75 wash and sterilization cycles. Tie-back closure with knitted cuffs. Cost-effective for hospitals with in-house laundry and sterilization facilities.
Disposable SMS Surgical Gowns
Spunbond-Meltblown-Spunbond nonwoven at 35-45 GSM. Single-use, fluid-resistant barrier protection meeting AAMI Level 2-3 standards. Tie-back or Velcro closure with knitted cuffs and thumb loops. Available sterile (ETO sterilized) or non-sterile.
Disposable SMMS Surgical Gowns
Spunbond-Meltblown-Meltblown-Spunbond nonwoven at 40-60 GSM. Double meltblown layer provides enhanced barrier protection for AAMI Level 3 and Level 4 applications. Reinforced with impervious panels in critical chest and forearm zones.
Wraparound Surgical Gowns
Full-coverage gown that wraps around the back and ties at the front-side, providing 360-degree coverage without back opening. Available in both reusable and disposable options. Required for sterile surgical environments where complete barrier protection is essential.
Isolation Gowns
Protective gowns for non-surgical clinical use including patient examination, specimen handling, and isolation ward procedures. Available in SMS nonwoven (disposable) or poly-cotton (reusable). AAMI Level 1 or Level 2 protection.
Visitor Gowns
Lightweight, economical gowns for hospital visitors and pharmaceutical factory tours. Disposable polypropylene nonwoven at 25-30 GSM. Available in blue, white, or green. Minimum barrier protection for controlled-access environments.
Material Specifications & AAMI Classifications
Technical specifications for informed procurement decisions on surgical barrier protection
SMS Nonwoven (35-45 GSM)
Three-layer Spunbond-Meltblown-Spunbond fabric. Outer spunbond layers provide tensile strength while the meltblown middle layer acts as a fluid barrier. 35 GSM for AAMI Level 2, 40-45 GSM for AAMI Level 3. Lint-free, breathable, and fluid-resistant.
SMMS Nonwoven (40-60 GSM)
Four-layer fabric with double meltblown layers for enhanced barrier protection. 45-50 GSM for AAMI Level 3, 50-60 GSM with PE reinforcement panels for AAMI Level 4. Superior fluid resistance for high-risk surgical procedures.
100% Cotton (140-180 GSM)
For reusable surgical gowns. Autoclavable at 121 and 134 degrees Celsius. 140 GSM standard, 180 GSM for reinforced areas. Breathable and comfortable. Suitable for AAMI Level 1, upgradeable to Level 2 with DWR fluid-resistant treatment.
AAMI PB70 Level Classification
Level 1: minimal barrier for basic care. Level 2: low barrier against fluid splash. Level 3: moderate barrier for most surgical procedures. Level 4: highest barrier against blood-borne pathogen penetration. TMR manufactures gowns at all four AAMI levels.
Customization & Compliance Options
Surgical gowns configured to your hospital's clinical protocols and regulatory requirements
Sterile ETO Packaging
Ethylene Oxide sterilized gowns individually packed in sealed pouches with sterilization indicators. Double-wrapped for aseptic opening in the operating room. Shelf life of 2-5 years when packaging integrity is maintained.
CE Marking & Regulatory Compliance
Surgical gowns CE marked as Class I medical devices under EU MDR for European markets. EN 13795 compliant. Third-party tested by accredited laboratories per AATCC 42, AATCC 127, ASTM F1670, and ASTM F1671 standards.
Custom Reinforcement Zones
Impervious PE film or additional nonwoven layers laminated to chest and forearm areas per your surgical protocol requirements. Critical zone reinforcement configurable for specific surgical specialties.
Private Label & Hospital Branding
Private-label packaging with your hospital or distributor branding. Custom gown colors for department identification. Printed gown labels in your preferred language with regulatory compliance markings.
Why Choose TMR for Surgical Gowns
Full AAMI Level Range (1-4)
We manufacture surgical gowns at all four AAMI PB70 barrier levels, from basic visitor gowns to the highest-protection reinforced SMMS gowns for complex surgery. One supplier for your entire surgical gown requirement.
Reusable and Disposable Options
Whether your hospital prefers cost-effective reusable cotton gowns or consistent-barrier disposable SMS/SMMS gowns, TMR manufactures both under one roof. We also provide guidance on which option best suits each clinical scenario.
CE Marked for EU Export
Our disposable surgical gowns are CE marked as Class I medical devices under the EU Medical Device Regulation, with EN 13795 compliance. Ready for direct import into European markets without additional certification.
Accredited Third-Party Testing
All surgical gowns are tested by accredited third-party laboratories for barrier performance per AATCC 42, AATCC 127, ASTM F1670, and ASTM F1671. Test reports provided with every bulk shipment for your quality records.
Sterile Packaging Capability
In-house ETO sterilization and sterile packaging with validated sterilization indicators. Double-wrapped sealed pouches for aseptic OR opening. Gamma irradiation sterilization also available upon request.
Scalable Production for Large Orders
Production capacity to handle orders from 1,000 to 100,000+ pieces. MOQ of 500 pieces for reusable cotton gowns and 1,000 pieces for disposable SMS/SMMS gowns. Volume discounts for orders exceeding 5,000 pieces.
Frequently Asked Questions
What is the difference between reusable and disposable surgical gowns?
What are AAMI levels for surgical gowns?
What is SMS fabric used in surgical gowns?
What is the minimum order for surgical gowns from India?
Source Surgical Gowns from India
Get a free quote for AAMI Level 1-4 surgical gowns, isolation gowns, and visitor gowns with CE marking and sterile packaging options